Minolta MND55 - Sharpness; Flash; Iso; Date & Time Stamp

1.
In Interval Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Multi, Center, Spot, Matrix).
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.6 Sharpness
This function adjusts the visible detail of a photograph.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button
to enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Sharp, Normal, Soft).
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.7 Flash
This function allows to change the flash settings.
1. In Interval Photo Mode press the MENU button.
2. Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3. Press the RIGHT button to enter the settings menu.
4. Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5. Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Auto, Off, On).
6. Press the MENU button to exit the settings menu without making a selection.
3.2.8 ISO
This function adjusts the light sensitivity in your photograph.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to enter
the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (ISO Auto, 100, 200, 400, 800, 1600, 3200,
6400).
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.9 Date & Time Stamp
This setting allows you to imprint a date & time onto your captured image files. Once an
image file is captured with the imprint, the imprint cannot be removed.