Minolta MND55 - Interval Duration; White Balance; Exposure; Metering

4.
Select using the UP or DOWN buttons and press the MODE/OK
button to enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected resolution (64 Mega Pixels, 48 Mega Pixels, 30 Mega Pixels,
12 Mega Pixels).
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.2 Interval Duration
This function will allow you set the amount of time between each photo.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK
button to enter the Interval menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (3 Seconds, 10 Seconds, 15 Seconds, 20 Seconds,
30 Seconds).
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.3 White Balance
White Balance changes the color of light in your pictures, making it seem warmer or
cooler depending on how the light you're shooting in affects the frame.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK
button to enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Auto, Sunny, Cloudy, Incandescent, Florescent).
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.4 Exposure
This function adjusts the frame brightness in your photograph.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (-3, -2, -1, 0, +1, +2, +3).
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.5 Metering
Metering mode refers to the way in which a camera determines the appropriate exposure
(quantity of light reaching the camera lens). Spot metering will only base the exposure
setting on a very small area of the scene. Center metering will use the light from the center
of the LCD and the Multi setting measures the light at several points on the screen.