Minolta MND55 - Camera System Information; Restore Default Settings

3.2.21 Camera System Information
This setting displays the current firmware version of your camera.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the
MODE/OK button to enter the menu.
5.
Press the OK button to exit, and press the MENU button to exit the settings menu
without making a selection.
3.2.22 Restore Default Settings
Factory default settings can be restored in this menu. This function will not delete the
factory default settings.
1. In Interval Photo Mode press the MENU button.
2. Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3. Press the RIGHT button to enter the setup menu.
4. Select using the UP or DOWN buttons and press the
MODE/OK button to enter the menu.
5. Press the LEFT or RIGHT buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Confirm, Cancel).
6. Press the MENU button to exit the settings menu without making a selection.