Minolta MND55 - Focus Mode; Image Rotation; Frequency; LED Indicator

3.3.10 Focus Mode
This setting allows to set whether the lens will continuously autofocus during a video
recording, or will lock the focus as set before beginning a recording.
1.
In Video Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select Focus Mode using the UP or DOWN buttons and press the MODE/OK button
to enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Auto Focus or Manual Focus).
6.
Press the MENU button to exit the settings menu without making a selection.
3.3.11 Image Rotation
This option will flip the image on the LCD screen 180 degrees.
1. In Video Mode press the MENU button.
2. Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3. Press the RIGHT button to enter the setup menu.
4. Select using the UP or DOWN buttons and press the MODE/OK
button to turn Image Rotation on or off.
5. Press the MENU button to exit the settings menu without making a selection.
3.3.12 Frequency
This function sets the frequency of the camera from 50Hz to 60Hz. Please check the
frequency of your location and set accordingly.
1.
In Video Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Auto, 50 Hz, 60 Hz) the default frequency for
the United States is 60Hz.
6.
Press the MENU button to exit the settings menu without making a selection.
3.3.13 LED Indicator
This function allows you turn the LED status indicator on and off.
1.
In Video Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK
button to turn the LED Indicator on or off.
5.
Press the MENU button to exit the settings menu without making a selection.
3.3.14 Screen Timeout
This function sets the duration of time in which the camcorder will wait with no user input