Minolta MND55 - Iso; Video Quality; Image Rotation; Frequency

1.
In Time Lapse Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button
to enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Sharp, Normal, Soft).
6.
Press the MENU button to exit the settings menu without making a selection.
3.6.9 ISO
This function adjusts the light sensitivity in your video.
1.
In Time Lapse Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to enter
the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (ISO Auto, 100, 200, 400, 800, 1600, 3200,
6400).
6.
Press the MENU button to exit the settings menu without making a selection.
3.6.10 Video Quality
This setting allows to set the overall quality of the video file.
1. In Time Lapse Mode press the MENU button.
2. Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3. Press the RIGHT button to enter the settings menu.
4. Select Video Quality using the UP or DOWN buttons and press the MODE/OK button
to enter the menu
5. Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Super Fine, Fine, Normal).
6. Press the MENU button to exit the settings menu without making a selection.
3.6.11 Image Rotation
This option will flip the image on the LCD screen 180 degrees.
1. In Time Lapse Mode press the MENU button.
2. Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3. Press the RIGHT button to enter the setup menu.
4. Select using the UP or DOWN buttons and press the MODE/OK
button to turn Image Rotation on or off.
5. Press the MENU button to exit the settings menu without making a selection.
3.6.12 Frequency
This function sets the frequency of the camera from 50Hz to 60Hz. Please check the
frequency of your location and set accordingly.
1.
In Time Lapse Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT