Minolta MND55 - Digital Image Stabilization; Image Rotation; Frequency; LED Indicator

1.
In Interval Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select Date & using the UP or DOWN buttons and press the MODE/OK
button to turn the time stamp on or off.
5.
Press the MENU button to exit the settings menu without making a selection.
3.2.10 Digital Image Stabilization
This setting enables capture in high speed and low-light by electronically minimizing
motion blur and reducing camera shake.
1.
In Photo Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the
MODE/OK button to turn stabilization on or off.
5.
Press the MENU button to exit the settings menu without making a selection.
3.2.11 Image Rotation
This option will flip the image on the LCD screen 180 degrees.
1. In Interval Photo Mode press the MENU button.
2. Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3. Press the RIGHT button to enter the setup menu.
4. Select using the UP or DOWN buttons and press the MODE/OK
button to turn Image Rotation on or off.
5. Press the MENU button to exit the settings menu without making a selection.
3.2.12 Frequency
This function sets the frequency of the camera from 50Hz to 60Hz. Please check the
frequency of your location and set accordingly.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Auto, 50 Hz, 60 Hz) the default frequency for
the United States is 60Hz.
6.
Press the MENU button to exit the settings menu without making a selection.
3.2.13 LED Indicator
This function allows you turn the LED status indicator on and off.
1.
In Interval Photo Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK