Minolta MND55 - Auto Power off; Button Sound; Language; Date Format

Minutes).
6.
Press the MENU button to exit the settings menu without making a selection.
3.7.13 Auto Power Off
This function sets the duration of time in which the camera will wait with no user input
before automatically powering off.
1.
In Photo Burst Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons, and press the MODE/OK
button to enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Off, 3 Minutes, 5 Minutes, 10 Minutes).
6.
Press the MENU button to exit the settings menu without making a selection.
3.7.14 Button Sound
This function allows you to turn off the sounds of the camera.
1.
In Photo Burst Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK
button to enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Off, On).
6.
Press the MENU button to exit the settings menu without making a selection.
3.7.15 Language
This function
1.
In Photo Burst Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected language.
6.
Press the MENU button to exit the settings menu without making a selection.
3.7.16 Date Format
This function allows you to set the current Date and Time on your recorded video clips
and captured photos.
1.
In Photo Burst Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button
to enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK