Minolta MND55 - Metering; Sharpness; Iso; Date & Time Stamp

6.
Press the MENU button to exit the settings menu without making a selection.
3.7.5 Metering
Metering mode refers to the way in which a camera determines the appropriate exposure
(quantity of light reaching the camera lens). Spot metering will only base the exposure
setting on a very small area of the scene. Center metering will use the light from the center
of the LCD and the Multi setting measures the light at several points on the screen.
1.
In Photo Burst Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Multi, Center, Spot, Matrix).
6.
Press the MENU button to exit the settings menu without making a selection.
3.7.6 Sharpness
This function adjusts the visible detail of a photograph.
1.
In Photo Burst Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button
to enter the menu.
5.
Use the UP or DOWN buttons to navigate the menu, and press the MODE/OK button
to confirm your selected option (Sharp, Normal, Soft).
6.
Press the MENU button to exit the settings menu without making a selection.
3.7.7 ISO
This function adjusts the light sensitivity in your photograph.
1.
In Photo Burst Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to enter
the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (ISO Auto, 100, 200, 400, 800, 1600, 3200,
6400).
6.
Press the MENU button to exit the settings menu without making a selection.
3.7.8 Date & Time Stamp
This setting allows you to imprint a date & time onto your captured image files. Once an
image file is captured with the imprint, the imprint cannot be removed.
1.
In Photo Burst Mode press the MENU button.
2.
Select the Camera icon on the top of the left side of the screen using the UP or
DOWN buttons.
3.
Press the RIGHT button to enter the settings menu.
4.
Select Date & using the UP or DOWN buttons and press the MODE/OK