Mio DigiWalker C520 - Using the Contacts List

To exit the program, tap .
6.2 Using the Contacts List
After starting Contacts, the contacts list appears. It shows the names and phone
numbers (mobile phone numbers by default) of your contacts.
You can use the various buttons on the screen to search a contact, navigate to the
address of a contact, call a contact, and so on.
Tap one of the alphabet sets to
quickly find a contact.
Tap twice to display
the summary screen
of a contact.
A
dd a contact.
Exit
Edit the selected contact.
Delete the selected contact
Navigate to the address o
f
the selected contact.
Call the selected contact.
NOTE: If you have transferred the phone book from a Bluetooth mobile phone to your device
(as described in Section 5.3), the contacts will also appear in the list.
50