Mircom QX-5000 Series User Manual

QX-5000 Series Installation and Operation Manual
45
QMP-5100B and QMP-5101B Paging Configuration
As shown in previous figures, the QMP-5100B and QMP-5101B configuration DIP switches SW1 & SW2 are
located on the bottom right corner of the module.
Note: “OFF" means the switch is in the OFF or open position, "ON" means it is in the ON
or closed position.
DIP Switch
and Position
Function
DIP SWITCHES SW1-1 TO SW1-4 ARE USED FOR MULTIPLE QMP-5100Bs, ADDRESSES 1 TO 15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
DIP
switch
SW-1
1
ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON
2
OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON
3
OFFOFFOFFONONONONOFFOFFOFFOFFONONONON
4
.OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON
5 For automatic All Call (when PTT is pressed), set to ON, otherwise leave OFF.
6
Microphone Pre-Announce Tone:
OFF = no tone, ON = tone present
7
Master Telephone:
OFF = not present, ON = present
8
Paging Selector Panel:
Always OFF
DIP
switch
SW-2
1 Not used, must be left OFF.
2 Not used, must be left OFF.
3 Not used, must be left OFF.
4 Not used, must be left OFF.
5 Not used, must be left OFF.
6 Not used, must be left OFF.
7 Not used, must be left OFF.
8 Not used, must be left OFF.

Mircom QX-5000 Series Specifications

General

Brand	Mircom
Model	QX-5000 Series
Category	Security System
Language	English