Mircom QX-5000 Series User Manual

QX-5000 Series Installation and Operation Manual
49
QMT-5302 Master Firefighters' Telephone
MIRCOM's QMT-5302 Master Fire Fighters' Telephone may be used either alone as a single zone system (using
the QMT-5302 Master Telephone by itself), or as a multi-zoned system (with QZT-5302 Zone Selector Panels). NP-
896 slide-in labels are supplied with the QMT-5302. For a single zone system use the Connect label and for a multi-
zone system use the Clear All label. The QZT-5302 Telephone Selector panel includes blank labels for telephone
zone information.
Figure 30: QMT-5302 Master Firefighters’ Telephone
Only the QMT-5302 Master Telephone module requires power. It can be powered with a 24 VDC, 200 mA external
DC power source (filtered or un-filtered, such as four-wire smoke or auxiliary power from a fire alarm control panel),
or by connection to a QMP-5100B or QMP-5101B Paging Master (which in turn gets its power from the Audio
Cabinet).
Note: For ADDRESSABE telephone installation, refer to documents LT-931 Addressable Master Telephone
and LT-952 Addressable Selector Panel documents which are packed with these units.
LAMP
TEST
INCOMING
CALL
CLEAR
ALL
COMMON TEL.
TROUBLE
MASTER TEL.
TROUBLE

Mircom QX-5000 Series Specifications

General

Brand	Mircom
Model	QX-5000 Series
Category	Security System
Language	English