Mircom TX3 Series - Figure 7. Please Change Password

TX3 Nano Configurator
TX3 Nano Configuration Manual 15
Copyright 2019
4. If this is the first time that you have signed into this TX3 Nano, then enter
a new Configurator password in the New password and Repeat new
password fields, and enter a new panel password in the Panel
password field. See section 2.1 for more information on passwords.
Note: The Configurator password must be at least 6 numbers or letters.
The panel password can be a maximum of 6 numbers.
Figure 7. Please change password
5. After you change the password, enter the username and new password to
sign in.