Mircom TX3 Series - Delete Residents; Figure 23. Enable Elevator Restriction Unit

Residents
TX3 Nano Configuration Manual 45
Copyright 2019
3. Select Enable Elevator Restriction Unit. By default this
option is not selected.
Figure 23. Enable Elevator Restriction Unit
4. Provide the following information:
Select Elevator Restriction Unit. Specify the Elevator Restriction Units
that are allowed for this resident, as they appear in the TX3 Configuration
and Monitor Utility.
Select Elevator Floor Group. Specify the floor group for this resident, as
it appears in the TX3 Configuration and Monitor Utility.
5. Click Save Changes at the top of the window.
4.5 Delete Residents
Delete a resident
1. In the list of residents, click the trash icon beside the resident that
you want to delete.
2. Click OK.
Or
1. Select the checkmarks to the left of the residents that you want to delete.
2. Click the Delete Selected button at the top of the window.