EasyManua.ls Logo

Mircom TX3 Series - 1.1 TX3 Systems Overview

Mircom TX3 Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
TX3 Nano Configuration Manual 9
Copyright 2019
1.4.2 Cellular Call
The cellular-enabled models of the TX3 Nano (for example TX3-NANO-S4-
CA) make calls over the cellular network. In this situation, the TX3 Nano acts
like a cell phone.
Figure 3. Cellular call
1.4.3 VOIP Call
A VOIP call allows both audio and video calls from the TX3 Nano to a SIP
(Session Initiation Protocol) client. Both the called party and the TX3 Nano must
be registered with a SIP server. Video is one direction only: from the TX3 Nano
to the SIP client.
There are two options for managing SIP services:
Remote SIP server provided by a third party (for example OnSIP)
Local SIP server (for example Kamailio)

Table of Contents

Other manuals for Mircom TX3 Series

Related product manuals