Mircom TX3 Series - SIP Account Details; Figure 12. SIP Account Details

26 TX3 Nano Configuration Manual
Copyright 2019
TX3 Nano Settings
Unlock Door for. Specify the time in seconds to keep the door unlocked.
The default is 5 seconds.
NSL Call Wait Key. For NSL lines only, specify the key to press on the
resident’s phone to connect to the lobby phone while on an outside call.
The default is 2.
Note: Do not select 4; this is used to refuse entry or disconnect.
2. Click Save Changes at the top of the window.
3.11 SIP Account Details
Figure 12. SIP Account Details
The SIP Status section displays a red dot if the TX3 Nano is not registered with
a SIP server, a green dot if it is registered, and a yellow dot if it is attempting to
register.
Hover the mouse pointer over SIP Status to see the date and time of last SIP
registration.
In the SIP Account Details section, enter the SIP account details for this TX3
Nano. The TX3 Nano is a SIP client and can communicate with other SIP clients
through a SIP server.
You need:
• The IP address or domain name of the SIP server.
• The SIP username, SIP password, and Auth username of the TX3 Nano.
Configure the SIP account details
1. In the SIP Account Details section, provide information for each the
following:
Username. The SIP username of the TX3 Nano.