Mircom TX3 Series - Import Residents from a TX3 Telephone Entry Panel

Residents
TX3 Nano Configuration Manual 41
Copyright 2019
Sort the residents
• Click the column header to sort the list by that column in either ascending
or descending order.
Find a resident
• Type the resident’s name in the Search box.
4.2 Import Residents from a TX3 Telephone Entry
Panel
Create a backup of the TX3 Telephone Entry System
1. Start the TX3 Configurator and open the job file that has the resident
database.
2. Click File > Backup.
3. Select Backup current job only, then click Browse and specify
where you want to store the backup job file.
4. Click Backup Now.
5. Transfer the backup file to a computer that is on the same LAN as the TX3
Nano. The file has a .t3 extension.
Import the job file to a TX3 Nano
1. On the TX3 Nano Configurator, Click the Import button at the top
of the window.
2. Select the .t3 file, and then click Open.
3. Select the residents that you want to import. If you want to import all the
residents, select the checkmark at the top left of the list.
4. Click Add Residents.
The TX3 Nano imports the resident database from the backup job
file.