Mircom TX3 Series - Delete a Schedule or Holiday; Edit a Schedule or Holiday; Hide a Schedule or Holiday

52 TX3 Nano Configuration Manual
Copyright 2019
Schedules and Holidays
5.1.1 Example Period
This example describes how to create a period that is in effect every weekday
from 9:00 am to 5:00 pm, and that starts on July 1 2018 and ends on December 31
2018.
• Recurring. Select Weekly.
• Event from. Select 9:00 to 17:00.
• Repeat on. Select the checkboxes to the left of M, T, W, T, and F.
• Starts on. Select July 1 2018.
• Ends. Select On, then select December 31 2018.
5.2 Delete a Schedule or Holiday
Delete a schedule or holiday
1. Click the trash icon beside the schedule or holiday that you want to
delete.
2. Click OK.
5.3 Edit a Schedule or Holiday
Edit a schedule or holiday
1. Click the edit icon beside the schedule or holiday that you want to
edit.
2. Make changes to the information as described in section 5.1 on page 49.
3. Click Save Changes.
5.4 Hide a Schedule or Holiday
Hide a schedule or holiday
• Click the eye icon beside the schedule or holiday that you want to
hide in the calendar.
Show a hidden schedule or holiday
• Click the eye icon beside the schedule or holiday that you want to
show in the calendar.