Mitel 3000 User Manual

Mitel 3000
Broadband Module Manual
74
Enter the following parameters
Use Blacklist Enables or disables blacklisting of an external host if the
firewall has detected an intrusion from that host. Access is
denied to that host for 10 minutes.
Use Victim Protection Enables or disables the blocking of incoming broadcast Ping
commands for the period specified in Victim Protection Block
duration.
Victim Protection Block
Duration
The period for which incoming broadcast Pings are blocked.
The default setting is 600 seconds.
DOS Attack Block
Duration
If a Denial of Service attack is detected, traffic from that host
is blocked for the duration specified here. The default setting
is 1800 seconds.
Scan Attack Block
Duration
If scan activity from a host attempting to identify open ports
is detected, traffic from that host is blocked for the duration
specified here. The default setting is 86400 seconds (1 day).
Scan Detection
Threshold
If the number of scanning packets counted within the Scan
Detection Period exceeds the value set here, a port scan
attack is detected. The default setting is 5 per second.
Scan Detection Period The duration that scanning type traffic is counted for. The
default setting is 60 seconds.
Port Flood Detection
Threshold
This is the maximum number of SYN packets that can be
received by a single port before a flood is detected. The
default setting is 10 per second.
Host Flood Detection This is the maximum number of SYN
p
ackets that can be

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English