Mitel 5330 - Speak@Ease; Speed Call; Tag Call

5330/5340 IP Phones – User Guide
- 79 -
To view, change, and/or cancel a pending Reminder:
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Timed Reminder" appears.
3. Press the Reminder softkey.
4. Do one of the following:
• To change the Reminder, press the Change Key softkey, enter the new time, and
press the Save softkey.
• To cancel the Reminder, press the Cancel No. softkey.
• To exit without canceling the Reminder, press Superkey (must be programmed to a
key).
To acknowledge a Reminder when your phone rings once:
• Press the Confirm softkey.
Speak@Ease
Users of the Speak@Ease softkey can place a call by speaking the name of the person they
wish to dial. Speak@Ease enables you to have access to Mitel Speech Server. The Speech
Server is a speech recognition application that routes incoming calls to a specific destination
based on spoken commands.
To dial a call using Speak@Ease:
1. Press the key you have programmed to Speak@Ease.
2. Speak the name of the person you wish to call.
Speed Call
Speed Call is an application that allows you to dial a specific number with one key press. You
must program Speed Call on a Programmable key. For more information on programming
this key, see Program Feature Keys Using the Settings Application
.
To make a Speed Call:
• Press the key that you have programmed as your Speed Call key.
Tag Call
Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using
the tag, your system administrator or Telephone Company can identify the source of the call
and provide this information to appropriate personnel or authorities.
CAUTION: Tagging a non-malicious call may result in fines or other penalties.