Mitel 5330 - Trunk Flash

5330/5340 IP Phones – User Guide
- 80 -
To tag a malicious call:
1. Press the programmed Tag Call key while the call is in progress. For information on how
to program keys, see to Programming Features On Your Keys
-OR-
Press
(TRANS/CONF).
2. Dial the appropriate feature access code.
If the call was successfully tagged, Thank You is shown on the display; otherwise, Not
Allowed is displayed.
Note: Tag Call can be used on active two-party calls only. Calls on hold and conference
calls cannot be tagged.
Trunk Flash
The Trunk Flash feature allows you to access Centrex features (if available) while you are
talking on an outside call.
To flash a trunk while talking on an outside call:
1. Press the key you have programmed to Flash.
Note: You can program a key to single flash or double flash.
2. Wait for dial tone.
3. Dial the Centrex feature access code.