Mitel SX-50 - Message Registration and Restrictions

MESSAGE REGISTRATION
The system keeps track of the number . . .
of local call units made from each extension (or room, as in a
hotel/motel operation). The unit information provided by the Message
Register can be used to calculate the total cost of outside calls to be
charged to the extension/room.
You can read the individual message register while speaking with the
extension or while the console is idle, and print out the contents of the
register. You can also clear and reset the message register.
To Read the Message Register while Talking to the Extension
l Press and hold down MSG REG
to display the call units in the register while you speak with the
extension user. For example, you might see:
EXT-252 0012 UNITS
I
Note: Please note that the display does NOT show the number of
calls, but the number of call units. One call may represent
several call units.
l Release MS@ REG
to return to normal operation.
?o reid the Message Register while the console is idle
l Press and hold down MSG REG
The display prompts you for an extension number:
EXT-NUMBER ?
l Dial the desired extension number
to see the call units for that message register:
EXT-252
0012 UNITS
l Release MSG REG
to return to normal operation.
:
4-12 Attendant Functions
-