ATTENDANT FUNCTION CODES
A number of Attendant Function Codes . . .
have been referred to in this guide: they are 2-digit codes dialed after
pressing FUNCTION. They tell the system what you want to do. Many
of the codes mimic the action of the console’s Feature Keys.
Listed below are the Attendant Function Codes vou will use, and any
related Feature Keys.
OPERATOR
RELATED
FUNCTION FUNCTION PERFORMED
FEATURE
CODE
KEY
11
12
13
14
15
17
ia
Puts system into Night Service. Displays NIGHT.
Puts system into Day Service.
When held down, displays the number and message of a
non-fatal alarm. Bell stops ringing and LED remains lit.
Release key to return to operating mode.
Sets the time in l2-hour format, but requires entry in
24-hour format. The display is 12 HOUR CLOCK HHMM.
Sets the time in 24-hour format, and requires entry in
24-hour format. The display is 24 HOUR CLOCK HHMM.
Turns on background music. Briefly displays MUSIC-ON.
Turns off background music. Briefly displays MUSIC-OFF.
22 Displays contents of Message Register.
23 Puts on Call Blocking. Displays CALL BLOCK.
24
60
Disables Call Blocking. CALL BLOCK is removed from
the display.
Displays VIEW ABBREVIATED DIALING ENTRY ? and
allows you to see the full telephone number that
corresponds to the 2-digit list entry code that you have
to dial next. Press RELEASE to return to operating mode.
None
Call Block
None
5-6
Reference
To Next Page
Loading...
