PRINTER CONTROL/DATA DUMP
Data Dumping
It is possible to print out a record of the information the system
contains on the way trunks, extensions, and other devices have been
set up. This is known as the system data, and printing it out is called
“dumping the data”. This function will typically be performed by
maintenance personnel.
To Dump Data
Press FUNCTION
Dial 97
The system shows it is ready for the next step:
DATA DUMP
Dial a 4-digit access code
(Maintenance personnel will give you this code)
The display shows a sequence of numbers, from 100 upwards, as the
data starts to print.
DATA DUMP CMD 100
When the system has sent all of the data to the printer, the display
returns to normal.
If a call comes in while you are dumping data . . .
you can stop the dump and answer the call.
l
Press RELEASE
l
Press the appropriate softkey
After you have dealt with the call,
l
Start the dump again from the beginning.
Attendant Functions
4-21
To Next Page
Loading...
