Mitel SX-50 - Message Registration

PRINTER CONTROL/MESSAGE REGISTRATION
To Control Printing
l Press FUNCTION
l Dial 75
The display shows that system is ready to receive a printing
command:
PRINT OPTION ?
I
l Dial *to SUSPEND PRINTING
Or dial 0 to PURGE PRINT QUEUE
Or dial # to RESUME PRINTING
The system carries out the command and returns to idle console.
To Print Message Register Contents
l Press FUNCTION
l Dial 73
The display briefly confirms that the system has accepted the
command:
MESSAGE REGISTRATION AUDIT
I I
Display then returns to normal operation while the contents of the
message register prints.
Note: If the printer does not start to print the message register, try
entering the RESUME PRINTING command (#). ,
The register contents printed out give the extension number, and call
units currently registered.
. .
:.
;:
4-18 Attendant Functions
*
L. .
. i.
.:.
,&2