4.2.7 Program Documentation
Network Header
Titling the network header is optional and provides a means to identify the program network with
a descriptive title of up to 22 characters. This can assist handling projects where large numbers
of networks are present.
햲
With Network 1 selected, click the
Network Header
button or double click the mouse
pointer over the network header area and enter the following data into the Title field ONLY
–leavethe
Label
field Blank as this has another function:
햳
Click
OK
and the network header will be displayed on the left hand side of the screen:
Note that the title may require pre-formatting (Padding with spaces), depending on the screen
resolution set, to read correctly as the text auto wraps to fit into the horizontal space available (22
characters max).
Network Comments
Comments enable virtually freehand text descriptors to be added anywhere inside the ladder
network area. This is vital to provide descriptions of the operation of the program.
햲
To create a comment, press the ‘Comment Button’ on the toolbar.
햳
The mouse pointer changes to , click the left mouse button wherever the comment is
to be placed and type the required text and press <Enter>:
Building a Project Application Program
Training Manual GX IEC Developer 4 - 33
To Next Page
Loading...
