7.4 Monitoring Mitsubishi “Transfer Form” Objects
It is also possible to monitor using the Mitsubishi Kn (Official – ‘Transfer Form’) notation for
Boolean objects. For example K1X0 monitors X0 - X3 as shown in the following example:
Setup Options
Don’t Search Variables in GVL
- if a direct Mitsubishi address is entered into the
Entry Data
Monitor
(EDM), for example M0 the system automatically searches the GVL for the identifier.
This can take a long time in large projects. By checking the box as shown, this automatic search
is disabled.
Monitor only Visible Objects in Window
- generally all elements in the EDM are monitored,
even if they are not visible. By checking the box as shown, only objects in the active window are
monitored. This speeds up response for large headers.
Advanced Monitoring Functions Monitoring Mitsubishi “Transfer Form” Objects
Training Manual GX IEC Developer 7 - 9
To Next Page
Loading...
