2.9.5 Network Modules for Profibus/DP
The Profibus/DP network enables communication between a master module and decentralised
slave modules, with data transfer rates of up to 12 Mbps. With a MELSEC PLC as master,
PROFIBUS/DP allows quick and simple connection of sensors and actuators, even from differ
-
ent manufacturers.
A MELSEC PLC, serving as slave in a PROFIBUS/DP network, can execute decentralised con
-
trol tasks and simultaneously exchange data with the PROFIBUS/DP master.
To help reduce costs PROFIBUS/DP uses RS485 technology with shielded 2-wire cabling.
FX
0N-32NT-DP
FX
3U-32DP
Extending for Special Functions The Hardware
2-26 MITSUBISHI ELECTRIC
0N
FX
-32NT-DP
POWER
BF
DIA
DC
RUN
The FX0N-32NT-DP PROFIBUS DP slave module enables
theattachedFXbaseunittobeaslavestationona
PROFIBUS DP network. Transfer of up to 40 bytes of data
per cycle is supported at up to 12 Mbps.
3U
FX
-32DP
DIA
FROM/
T
O
T
OKEN
RUN
POWER
Like the FX0N-32NT-DP, the FX3U-32DP is a
PROFIBUS/DP slave module. It allows the integration of a
FX
3G,FX3U,orFX3UC PLC into a PROFIBUS/DP
network.
To Next Page
Loading...
