Mitsubishi Electric FX Series - Example Use of a DUT

10.1 Example use of a DUT
The following example illustrates the use of a DUT.
햲
Create a new project called “Motor Control DUT”:
햳
Ceate a new Program POU called MOTOR_CONTROL
햴
Create a new Task in the task pool called MAIN and bind the Program MOTOR_CONTROL
to it.
햵
Create a new Function Block “STAR_DELTA” and re-enter the following program code.
Alternatively, ‘Copy-Paste’ the original function block, ‘Body and Header’, from the project
“Motor Control” as follows:
Body: STAR_DELTA
Header: STAR_DELTA
The Header contains the definitions (Mask) of the data types that will be used when creating the
DUT “SD”.
Example use of a DUT Data Unit Types (DUT)
10 - 2 MITSUBISHI ELECTRIC