2.9.1 Analog Modules
Without additional modules the base units of the MELSEC FX family can only process digital
input and output signals (i.e. ON/OFF data). Additional analog modules are thus required for
inputting and outputting analog signals.
햲
The special function block FX2N-8AD is able to measure voltage, current and temperature.
햳
The FX3UC-4AD can be connected to base units of the FX3UC series only.
Extending for Special Functions The Hardware
2-20 MITSUBISHI ELECTRIC
Modul Type Designation
No. of
channels
Range Resolution
FX
1S FX1N
FX2N
FX2NC
FX3G
FX3U
FX3UC
Adapter
Board
FX
1N-2AD-BD 2
Voltage:
0 V to 10 V DC
2.5 mV (12 Bit)
쎲쎲쑗쑗쑗
Current:
4 mA to 20 mA DC
8 µA (11 Bit)
FX
3G-2AD-BD 2
Voltage:
0 V to 10 V DC
2.5 mV (12 Bit)
쑗쑗쑗쎲쑗
Current:
4 mA to 20 mA DC
8 µA (11 Bit)
Special
Adapter
FX
3U-4AD-ADP 4
Voltage:
0 V to 10 V DC
2.5 mV (12 Bit)
쑗쑗쑗쎲쎲
Current:
4 mA to 20 mA DC
10 µA (11 Bit)
Special
Function
Modules
FX
2N-2AD 2
Voltage:
0 V to 5 V DC
0 V to 10 V DC
2.5 mV (12 Bit)
쑗쎲쎲쎲쎲
Current:
4 mA to 20 mA DC
4 µA (12 Bit)
FX
2N-4AD 4
Voltage:
-10 V to 10 V DC
5 mV
(with sign, 12 bits)
쑗쎲쎲쎲쎲
Current:
4 mA to 20 mA DC
-20 mA to 20 mA DC
10 µA
(with sign, 11 bits)
FX
2N-8AD
햲
8
Voltage:
-10 V to 10 V DC
0.63 mV
(with sign, 15 bits)
쑗쎲쎲쎲쎲
Current:
4 mA to 20 mA DC
-20 mA to 20 mA DC
2.50 µA
(with sign, 14 bits)
FX
3U-4AD
FX
3UC-4AD
4
Voltage:
-10 V to 10 V DC
0.32 mV
(with sign, 16 bits)
쑗쑗 쑗쎲
햳
쎲
햳
Current:
4 mA to 20 mA DC
-20 mA to 20 mA DC
1.25 µA
(with sign, 15 bits)
Adapter
Board
FX
1N-1DA-BD 1
Voltage:
0 V to 10 V DC
2,5 mV (12 Bit)
쎲쎲쑗쑗쑗
Current:
4 mA to 20 mA DC
8 µA (11 Bit)
FX
3G-1DA-BD 1
Voltage:
0 V to 10 V DC
2,5 mV (12 Bit)
쑗쑗쑗쎲쑗
Current:
4 mA to 20 mA DC
8 µA (11 Bit)
Special
Adapter
FX
3U-4DA-ADP 4
Voltage:
0 V to 10 V DC
2,5 mV (12 Bit)
쑗쑗쑗쎲쎲
Current:
4 mA to 20 mA DC
4 µA (12 Bit)
Special
Function
Modules
FX
2N-2DA 2
Voltage:
0 V to 5 V DC
0 V to 10 V DC
2.5 mV (12 Bit)
쑗쎲쎲쎲쎲
Current:
4 mA to 20 mA DC
4 µA (12 Bit)
Analog Input ModulesAnalog Output Modules
To Next Page
Loading...
