Mitsubishi Electric FX Series - Creating a New POU

This is the primary display of the project.
The project navigation window on the left hand side of the screen enables the user to rapidly
access any portion of the project by double clicking on the selection.
4.2.3 Creating a new “POU”
햲
Click on the “New POU” button (or “Right Click” on POU Pool) on the tool bar. The new
POU specifications are to be entered as follows:
The name of the POU will be ‘MAIN’ and it should be specified as a Ladder Diagram of type
PRG (Program).
햳
Click
OK and note the addition to the POU Pool in the ‘Project navigation window’:
햴
Double click on
MAIN program icon or click the symbol on the POU Pool in order to expand
the directory branch and display the Header and Body entries:
Application Program Building a Project
4-8 MITSUBISHI ELECTRIC