12.3.2 Importing a Mitsubishi Library Function Block
The following illustrations demonstrate the procedures required to import a Mitsubishi function
block for analogue input using a module FX
3U-4AD.
This function block is provided by Mitsubishi. In order for the following example to function cor
-
rectly, it is necessary to install the library "AnalogFX" into the project. The library is to be found on
the Mitsubishi website (www.mitsubishi-automation.com). After the installation the library can
be accessed from the “Userlib” directory.
햲
Create a new empty project with no POU’s called “Analogue_Demo”.
햳
Create a new POU (Type:
FBD
, Class:
PRG
) and name it “Analogue_Input”
햴
Right click on the
Library_Pool
icon and then on
Install/Create User Library
. This opens
a new dialogue window. Select
Browse Lib
. Select the AnalogFX_V310.SUL library file
and click
Open
.
You may also select the accompanying library help file by clicking on
Browse Help
.
햵
Click
OK
on the
Install/Create User Library
prompt:
Working with Libraries Importing Libraries into Projects
Training Manual GX IEC Developer 12 - 11
To Next Page
Loading...
