Mitsubishi Electric FX Series - Setting up a HMI of the GOT1000 Series (GT12, GT15 or GT16)

18.4 Setting up a HMI of the GOT1000 Series (GT12,
GT15 or GT16)
햲
Please start GT-Designer2 and open a new project. In the Project Navigator window, dou
-
ble click on System Settings and make the settings shown below.
햳
In the System Enviroment, double click on Communication Settings and make the set-
tings shown below.
햴
Then, in the Communication Settings window, click on
Detail Setting .
Ethernet Communications Setting up a HMI of the GOT1000 Series (GT12, GT15 or GT16)
Training Manual GX IEC Developer 18 - 11