12.3 Importing Libraries into Projects
Once ‘User Libraries’ have been created, it is possible to re-use routines by importing them into
other applications. Mitsubishi Electric has produced many Libraries of commonly used routines.
For example, ‘Intelligent Module’ interfaces such as A/D and D/A Function Blocks containing all
the code to facilitate a working interface for these and many more modules. These Function
Blocks are available free on many of the Mitsubishi web sites and some are provided on the
GX IEC Developer Master Disk.
The following two examples describe the methods used to import libraries into working applica
-
tions.
12.3.1 Import of an User Library
The previously saved library “MCC_Programs” will be imported into the current project and the
Function Block contained therein will be re-used.
햲
Create a new empty project with no POU’s called “Library Import”.
햳
Enter the following details into the prompt:
Importing Libraries into Projects Working with Libraries
12 - 8 MITSUBISHI ELECTRIC
To Next Page
Loading...
