Continue to complete the program documentation as follows:
Moving the position of a comment
With the cursor in ‘Select Mode’, it is possible to grab and move the comments around the ladder
network area. To achieve this, click and hold on the left part of the comment dialogue area. Drag
the comment anywhere on the screen and release the mouse button.
Deleting a comment
Click once on the comment to highlight and press the <Delete> key on the keyboard.
Cutting / Copying a comment
Duplication of comments is achieved by clicking on the left hand end of the source comment to
highlight it. Use windows cut/copy – paste procedure and click the mouse once again to set posi-
tion of destination comment in another network.
4.2.8 Checking and Building the Project Code
햲
When the Ladder Diagram is complete and task has been specified in the Task Pool, once
again press the “Check” button on the tool bar to check the program for errors; the fol-
lowing dialogue should be displayed:
4-34 MITSUBISHI ELECTRIC
Building a Project Application Program
To Next Page
Loading...
