Mitsubishi Electric FX Series - Scan Information and Real Time Clock (D8010 to D8019; PLC Operation Mode (D8030 to D8039

A.2.2 Scan Information and Real Time Clock (D8010 to D8019)
*
For an FX2NC a memory card with integrated RTC must be installed.
A.2.3 PLC Operation Mode (D8030 to D8039)
Appendix Special Registers
Training Manual GX IEC Developer A - 7
Special Register Read Write CPU Function
D8030
쏹
—
FX
1S
FX1N
FX3G
Value of analog volume VR1 (Integer from 0 to 255)
D8031
쏹
—
Value of analog volume VR2 (Integer from 0 to 255)
D8032 – D8038 — — —
Not used
D8039
—
쏹
FX
1S
FX1N
FX2N
FX2NC
FX3G
FX3U
FX3UC
Constant scan duration
Default: 0 ms (in 1 ms steps)
(Writes from system ROM at power ON)
Can be overwritten by program
Special Register Read Write CPU Function
D8010
쏹
—FX
1S
FX1N
FX2N
FX2NC
FX3G
FX3U
FX3UC
Present scan time (in units of 0.1 ms)
D8011
쏹
— Minimum value of scan time (in units of 0.1 ms)
D8012
쏹
— Maximum value of scan time (in units of 0.1 ms)
D8013
쏹
쏹
FX
1S
FX1N
FX2N
FX2NC*
FX3G
FX3U
FX3UC
Real time clock: Seconds (0 to 59)
D8014
쏹
쏹
Real time clock: Minutes (0 to 59)
D8015
쏹
쏹
Real time clock: Hours (0 to 23)
D8016
쏹
쏹
Real time clock: Date (Day, 1 to 31)
D8017
쏹
쏹
Real time clock: Date (Month, 1 to 12)
D8018
쏹
쏹
Real time clock: Date (Year, 0 to 99)
D8019
쏹
쏹
Real time clock: Day of the week (0 (Sunday) to 6 (Saturday))