18.2 Configuring the FX3U-ENET by FX Configurator-EN
햲
Open the FX Configurator-EN and start the setting of the ETHERNET module FX3U-ENET.
햳
Now select the special function module address of the FX
3U-ENET. Special function mod-
ules connected to the right side of the base unit are counted from left to right. If the
FX
3U-ENET is the first special function module select Module 0.
Ethernet Communications Configuring the FX3U-ENET by FX Configurator-EN
Training Manual GX IEC Developer 18 - 3
To Next Page
Loading...
