Mitsubishi Electric M800VS Series - Connecting with Emergency Stop Signal

M800VS/M80V Series Connection and Setup Manual
7 Connection of Control Unit
7.3 Connecting with Emergency Stop Signal
220
IB-1501613-A
7.3 Connecting with Emergency Stop Signal
Connect the emergency stop switch to EMG connector of the control unit.
[Related items]
Cable drawing: "15.2.14 J120 Cable"
Connector pin assignment: "4.3 Control Unit [M800VS]" (EMG connector)
J120
+24V
EMGIN
LG
R
FG
EMG
Control unit
Control unit
Emergency stop input circuit
Emergency
stop switch
Emergency
stop switch