M800VS/M80V Series Connection and Setup Manual
37 Appendix 2: Protection Setting
37.5 Clearing the Password
591
IB-1501613-A
37.5 Clearing the Password
(Example) Clear the password of operation level 4
(1) Clearing the password is available only for the lower operation level than the current one.
Operation Methods
(1)
Press the menu [Change pasword]. The menu [Change pasword] is highlighted.
The operation message "Enter the current password." is
displayed.
The cursor appears on the current operation level.
(2) Use [ ↑ ] or [ ↓ ] key to move the cursor to the opera-
tion level where you want to change the password.
(Operation level 4 in this case)
The operation message "Enter the current password." is
displayed.
(3)
Enter the current password for the operation level of
the cursor position.
(Example) OLDPASS [INPUT]
<When the password is correct>
The operation message "Enter a new password." is dis-
played.
<When the password is incorrect>
The operation message "Your password is incorrect." is
displayed, and then the operation returns to the process
(2).
(4)
Enter "0".
(Example) 0 [INPUT]
The operation message "Clear the password? (Y/N)" is dis-
played.
(5)
Press the [Y] or [INPUT] key. <When pressing [Y] or [INPUT] key>
The operation message "Password has been cleared" is
displayed, and then the password returns to the initial one.
The highlighted menu [Change pasword] returns to normal.
<When pressing other than [Y] or [INPUT] key>
The operation message disappears and the password
stays the same.
The highlighted menu [Change pasword] returns to normal.
Note
To Next Page
Loading...
