M800VS/M80V Series Connection and Setup Manual
10 Connection of Remote I/O Unit
10.6 Connecting with Machine Control Signal (FCU8-DX220/FCU8-DX230/FCU8-DX231/FCU8-DX651)
284
IB-1501613-A
10.6 Connecting with Machine Control Signal
(FCU8-DX220/FCU8-DX230/FCU8-DX231/FCU8-DX651)
[Related items]
Cable drawing: "Cable: J351 Cable"
Connector pin assignment: "4.9 Remote I/O Unit" (CJ31/CJ32 connector)
[Related items]
Cable drawing: "Cable: J351 Cable"
Connector pin assignment: "4.9 Remote I/O Unit" (CJ31/CJ32/CJ33/CJ34 connector)
FCU8-DX220
FCU8-DX230/FCU8-DX231
CAUTION
(1) Connect the cable to the designated connector. Incorrect connections could damage the device.
(2) Do not connect or disconnect the cables between units while the power is ON.
J351
J351
CJ31
CJ32
CJ33
CJ34
To Next Page
Loading...
