Mitsubishi Electric M800VS Series - Ferrite Core

M800VS/M80V Series Connection and Setup Manual
40 Appendix 5: EMC Installation Guidelines
40.6 EMC Countermeasure Parts
604
IB-1501613-A
40.6.2 Ferrite Core
The ferrite core is mounted integrally with the plastic case.
This can be installed with one touch without cutting the interface cable or power supply cable.
This ferrite core is effective against common mode noise, allowing measures against noise without affecting the quality of the
signal.
Recommended ferrite core: TDK ZCAT Series
(*1) Stamped with an ‘M’.
(*2) A fixing band is attached at shipment.
(*3) The core is taped with double-sided tape. (The part arrives taped)
 ZCAT-B type: Cabinet fixing type installation hole o4.8 to 4.9 mm, plate thickness 0.5 to 2 mm
 ZCAT-AP, ZCAT-C type: Structure that prevents easy opening after case is closed.
Unit: mm
Part Name A B φC φD E Applicable cable outer diameter Mass (g)
ZCAT1518-0730-M(-BK)(*1) 22±1 18±1 7±1 15±1 - Maximum 7 6
ZCAT1518-0730(BK)(*2) 22±1 18±1 7±1 15±1 - Maximum 7 6
ZCAT2017-0930-M(-BK) 21±1 17±1 9±1 20±1 - Maximum 9 11
ZCAT2032-0930-M(-BK)(*1) 36±1 32±1 9±1 19.5±1 - Maximum 9 22
ZCAT2032-0930(-BK)(*2) 36±1 32±1 9±1 19.5±1 - Maximum 9 22
ZCAT2132-1130-M(-BK)(*1) 36±1 32±1 11±1 20.5±1 - Maximum 11 22
ZCAT2132-1130(-BK)(*2) 36±1 32±1 11±1 20.5±1 - Maximum 11 22
ZCAT3035-1330-M(-BK)(*1) 39±1 34±1 13±1 30±1 - Maximum 13 63
ZCAT3035-1330(-BK)(*2) 39±1 34±1 13±1 30±1 - Maximum 13 63
ZCAT1525-0430AP-M(-BK) 25±1 20±1 4±1 15±1 11.5±1 2.5 to 4 (USB) 7
ZCAT1325-0530A-M(-BK)(*1) 25±1 20±1 5±1 12.8±1 11.2±1 3 to 5 (USB) 7
ZCAT1325-0530A(-BK) 25±1 20±1 5±1 12.8±1 11.2±1 3 to 5 (USB) 7
ZCAT1730-0730A-M(-BK) 30±1 23±1 7±1 16.5±1 15±1 4 to 7 (USB) 12
ZCAT2035-0930A-M(-BK)(*1) 35±1 28±1 9±1 19.5±1 17.4±1 6 to 9 22
ZCAT2035-0930A(-BK) 35±1 28±1 9±1 19.5±1 17.4±1 6 to 9 22
ZCAT2235-1030A-M(-BK) 35±1 28±1 10±1 21.5±1 20±1 8 to 10 27
ZCAT2436-1330A-M(-BK) 36±1 29±1 13±1 23.5±1 22±1 10 to 13 29
ZCAT2017-0930B-M(-BK) 21±1 17±1 9±1 20±1 28.5±1 Maximum 9 12
ZCAT2749-0430C-M(-BK) 49±1 27±1 4.5±1 19.5±1 - Maximum 4.5 26
ZCAT4625-3430D(-BK) 45.5±1 24.5±1 34±1 12±1 - 26 For core flat cable 32
ZCAT4625-3430DT(-BK)(*3) 45.5±1 24.5±1 34±1 13±1 - 26 For core flat cable 32
ZCAT6819-5230D(-BK) 67.5±1 18.5±1 52±1 16±1 - 40 For core flat cable 58
ZCAT6819-5230DT(-BK)(*3) 67.5±1 18.5±1 52±1 17±1 - 40 For core flat cable 58
ZCAT-A, ZCAT-AP typeShape and dimensions
ZCAT type
ZCAT-C type
ZCAT-B type
ZCAT-D type