Mitsubishi Electric M800VS Series - Page 502

M800VS/M80V Series Connection and Setup Manual
23 Setting the Tool Entry Prohibited Range
23.2 Stored Stroke Limit
471
IB-1501613-A
[Stored stroke limit IIB (When inside range is prohibited)]
A range except for that of the stored stroke limit I becomes the movement prohibited range.
: Moveable range
: Prohibited range
(A): Set value for (-) side
(B): Set value for (+) side
(C): Prohibited range by stored stroke limit IIB
Positions No. 3 "#8205 OT-CHECK-P" and No. 4 "#8204 OT-CHECK-N" are set using coordinates from the basic machine
coordinate system.
Positions No. 1 and 2 are the prohibited range as set with stored stroke limit I.
1
2
3
4
(A)
(
B
)
(C)