5-54 Switches and controls
• If you select the DPF monitor mode on the multi-
information display during automatic DPF
regeneration, the “CLEANING” message is dis-
played above the PM indicator, and the PM indi-
cator flashes.
NOTE:
• During automatic DPF regeneration, the engine
operating sound will change and, when the vehi-
cle is stopped, the idling speed will rise (to 800
rpm) and the exhaust valve will be activated.
These are normal conditions.
• Automatic DPF regeneration does not take
place when the PTO is used. (Vehicles with a
PTO)
• During automatic DPF regeneration when the
indicator lamp is flashing in amber (or the
PM indicator is showing 7 or more segments), if
you continue pressing the DPF cleaning switch
until the lamp lights in amber, the system dis-
continues automatic DPF regeneration and ini-
tiates parked DPF regeneration.
• No automatic DPF regeneration takes place
while the and warnings (amber) are being
displayed alternately.
WARNING
If the vehicle must be stopped during auto-
matic DPF regeneration, do so after checking
that there are no flammable materials, such
as dead grass or paper, near the exhaust pipe
and muffler. As the exhaust gas as well as
the exhaust pipe and muffler are extremely
hot, nearby flammable materials could ignite
and cause a fire.
FE_FG.book Page 54 Monday, December 19, 2011 4:22 PM
To Next Page
Loading...
Need help?
General
