5-40 Switches and controls
2. When the desired speed is reached, turn the
SET/RESUME switch to the “SET” side for 1
second or longer. The vehicle will then cruise at
the new, higher speed.
4 To decrease the set speed in cruise con-
trol mode
Turn the SET/RESUME switch toward the “SET”
side. The vehicle will decelerate. Release the
switch when the desired speed is reached. The
vehicle will cruise at the new, lower speed.
5 To accelerate temporarily in cruise con-
trol mode
Depress the accelerator pedal as you do in normal
accelerating. When the pedal is released, the vehi-
cle will cruise at the set speed again.
6 Automatic deactivation of the cruise
control
The cruise control is deactivated automatically and
the indicator lamp also goes out in the following
conditions:
• When the brake pedal is depressed
• When the exhaust brake <option> is activated
• When the gearshift lever is moved to any posi-
tion other than “D”.
Z21526
Z21526
Z21524
FE_FG.book Page 40 Monday, December 19, 2011 4:22 PM
To Next Page
Loading...
