Mitsubishi Fuso Canter 2013

10-29
5.2 Setting the clock
1. Give the “DISP” button a long press while the
display is showing the time of day. A short beep
will sound, and the hour part of the time display
will start flashing.
2. Adjust the hour by turning the power/volume
knob.
Clockwise: The hour increases.
Counterclockwise: The hour decreases.
3. Press the “DISP” button. A short beep will
sound, and the minute part of the time display
will start flashing.
4. Adjust the minutes by turning the power/volume
knob.
Clockwise: The minutes increase.
Counterclockwise: The minutes decrease.
Z21847
Z21090
Z21848
Z21092
FE_FG.book Page 29 Monday, December 19, 2011 4:22 PM