10-19
3Radio
“AM/FM” button (FM1/FM2/AM1/AM2 selec-
tor button)
“ ” and “ ” tuning buttons
Scan search button
“PS/AS” button (automatic tuning/memory
button)
Preset buttons
3.1 To listen to the radio
1. With the starter switch in the “ACC” or “ON”
position, press the power/volume knob or the
“AM/FM” button to turn on the radio.
Give the power/volume knob a long press to turn
off the radio.
2. Extend the antenna. P. 10-11
3. Tune to the desired station.
• Press the “AM/FM” button.
If the audio system has been in the CD player
mode, it will switch to the radio mode.
If the system has been switched to the radio
mode, the band changes in the following
sequence each time you press the button:
FM1 → FM2 → AM1 → AM2.
Z21761
Z21762
FE_FG.book Page 19 Monday, December 19, 2011 4:22 PM
To Next Page
Loading...
