13-3
The engine starts but stalls immediately.
The engine fails to stop.
Black or white exhaust gas
The engine overheats.
The engine preheating time is insuffi-
cient.
Follow the preheating instructions.
5-7
The fuel injection system is malfunc-
tioning.
Have an authorized dealer perform
necessary inspection.
–
The BlueTec
®
exhaust gas aftertreat-
ment is short of DEF.
Add the specified DEF.
1-8
A fluid other than the specified DEF is
inside the tank.
Place the starter switch in the “LOCK”
position, and immediately contact an
authorized dealer who will discharge
the fluid and inspect the vehicle.
–
Possible cause Remedy Ref. page
Idling speed setting is too low. Have an authorized dealer perform
necessary inspection.
–
The fuel filter is clogged. Replace the filter element. 12-43
The air cleaner is clogged. Clean or replace the filter element. 12-46
The DPF is blocked. Have an authorized dealer perform
necessary inspection.
–
Possible cause Remedy Ref. page
The fuel injection system is malfunc-
tioning.
Have an authorized dealer perform
necessary inspection.
–
The starter switch is malfunctioning. Have an authorized dealer perform
necessary inspection.
–
Possible cause Remedy Ref. page
The DPF system is malfunctioning. Have an authorized dealer perform
necessary inspection.
–
Possible cause Remedy Ref. page
The front of the intercooler and radia-
tor is plugged with dust and dirt.
Clean the intercooler and radiator with
a soft brush.
12-61
12-95
The coolant level is too low. Add coolant. 12-52
Possible cause Remedy Ref. page
FE_FG.book Page 3 Monday, December 19, 2011 4:22 PM
To Next Page
Loading...
