12-8 Simple inspection and service
2. Grasp tilt grip and pull lever C . The cab will
rise slightly.
3. Hold the tilt grip and raise the cab until the end
of cab stay engages with the notch of the
lock lever . The cab is secured when they are
engaged.
4. Still holding the tilt grip, insert the stopper into
the notch of the lock lever.
3 Lowering the cab
WARNING
• Be sure to fit the stopper into the notch in
the lock lever to prevent the cab from
dropping.
• Do not raise the cab holding lever B or
lever C. Failure to observe this precaution
can lead to the cab-tilt mechanism being
damaged or to incomplete locking when
the cab is lowered back down.
WARNING
• Before lowering the cab, make sure that
you have not left rags, tools, etc. in the
engine compartment. Flammable objects
left inside the engine compartment can
cause fires.
• To ensure safety, two people should work
together to lower the cab if it has a roof
deck or other heavy item attached to it.
One person working alone could become
unable to support the cab and have an
accident as a result.
Z09215
Z16404
Z16405
FE_FG.book Page 8 Monday, December 19, 2011 4:22 PM
To Next Page
Loading...
