Mitutoyo EJ-102N - Page 43

29
No. 99MBC139A
3 Operation Procedure
8
Press the [Fn] key when done making settings.
» Display returns to the counter display screen.
Tips
• An error (Error 90) will occur if settings are made as follows:.
With 3-step tolerance value settings: In any case other than S1 ≤ S4
With 5-step tolerance value settings: In any case other than S1 ≤ S2 ≤ S3 ≤ S4
• If this error occurs, press the [SEL/CE] key together with the [Fn] key to return to the preset value setting of
step 2, and then do the setting over again.
9
Make new preset value settings as necessary.
Tips
For details, see "3.2.2 Preset" on page 23.