33
No. 99MBC139A
3 Operation Procedure
No. Set value
Per-
axis
setting
Set value: Operation
Default
value
Description
22
Unit selection
(EJ-102NE
only)
N/A
0: mm (mm/s)
1: in (in/s)
0
The unit for displayed values can be
set to "mm" or "in".
Tips
• Changing this setting clears the
preset and tolerance values.
• The default value is not restored
even if the parameters are
re-initialized.
• The resolution of the Linear
Gageisxedto"in".
To Next Page
Loading...
