Mitutoyo ID-C112GXB - Page 41

No. 99MAH040B
3-26
Configurable items by external input
Configurable items
Settings
Preset
Preset No.: P1 / P2 / P3
Preset value: P1 / P2 / P3
Unit
mm / in (only inch models)
Tolerance judgment
ON / OFF
Upper and lower limit of each preset No.(P1, P2, P3)
Resolution
Metric
0.001 / 0.01
Inch
0.00005 / 0.0001 / 0.0005
Analog bar graduation
Metric
AUTO / 0.001 / 0.002 / 0.005 / 0.01 / 0.02 / 0.05 / 0.1 / 0.2 / 0.5 / 1 / 5
Inch
AUTO / 0.00005 / 0.0001 / 0.0002 / 0.0005 / 0.001 / 0.002 / 0.005 / 0.01 /
0.02 / 0.05 / 0.2
Key-lock
ON / OFF
Key-lock setting (multiple selection possible)
・PRESET(Preset setting)
・DATA/HOLD (Holding the display value/Display value output)
・in/mm (Switching the unit (inch⇔mm))
Analog bar display
ON / OFF
FAST mode
ON / OFF
Parameter-lock
ON / OFF
Parameter-lock setting (multiple selection possible)
・Preset value setting: P1/ P2/ P3
・Tolerance setting: P1: upper limit/lower limit
P2: upper limit/lower limit
P3: upper limit/ lower limit
・MENU key